SALES

 8 (800) 500-07-22

Request a call back

  • Production of STEKON composite reinforcing mesh based on alkali-resistant glass fiber Advantex with subsequent impregnation.

    The reinforcing mesh consists of bars arranged in a rigid mesh frame which is impregnated and fastened at the intersections with a polymer binding agent.

    Standard typical size is as follows: 1 or 2 meters in width cut to 1x2 m sheets, or in rolls (according to a preliminary order).

     

  • Physical and mechanical properties

    Property Value
    Ultimate tensile strength, MPa, not less than 1000
    Loss of tensile strength after conditioning in alkali medium, mot more than 25%
    Shearing strength, MPa, not less than 150
    Resistance to direct pull, kg, not less than 15

     

     

    An example of comparison to metal grid in terms of weight and diameter of a rod*

    Reinforcing grid ССК-2mm STEKON      

    weight of 1m2 = 0.13kg

    Metal grid (ВР-1) 3mm          

    weight of 1m2 = 1kg

    Reinforcing grid ССК-2.5mm STEKON      

    weight of 1m2 = 0.16kg

    Metal grid (ВР-1) 4mm          

    weight of 1m2 = 1.85kg

     

    * Recommended replacement of rod diameters is based on comparison of tensile parameters (1000 MPa in terms of tension).

    In basic fields of application, such as screeds, the grid serves as construction reinforcement, so other parameters are not taken into account.

     

     

  • Typical application:

    • reinforcement of sand cement screeds
    • reinforcement of brickworks
    • reinforcement of bilayer walls containing different materials (brick, gas-concrete- breeze-, claydite-concrete blocks and others)
    • reinforcement of facing bricks
    • reinforcement of ferro-concrete articles;
    • reinforcement of thick plaster layer;
    • reinforcement of asphalt concrete during construction of roads
    • reinforcement of soil (embankments, slopes, retaining walls, sides of ditches and pits).
  • High strength of composite rods


    High strength of composite rods

    Corrosive resistance


    Corrosive resistance

    Low weight (easier and efficient transportation, safe installation)


    Low weight (easier and efficient transportation, safe installation)

    Low thermal conductivity (no cold bridges).


    Low thermal conductivity (no cold bridges).