SALES

 8 (800) 500-07-22

Request a call back

PULGLASS unidirectional fiberglass profiles and rods
PULGLASS unidirectional fiberglass profiles and rods
PULGLASS unidirectional fiberglass profiles and rods

PULGLASS unidirectional fiberglass profiles and rods

Ask a question Request

  • PULGLASS unidirectional fiberglass profiles and rods are manufactured by pulling roving of glass strands preimpreganted with binding agent through a forming bushing.

     

  • Physical and mechanical properties of fiberglass rods

     

    Property Unit SSО-4 SSО-6 SSО-8 SSО-10 SSО-12 SSО-20
    Tensile stress at break, not less than MPa - - 500* 500* 500* 500*
    Water absorption at 23±2°С over 24±1 hrs, not more than % 0.1* 0.1* 0.1* 0.1* 0.1* 0.1*
    Impact viscosity across fibers, not less than kJ/m² - - 230* 230* 250* 250*
    Dielectric strength along fibres, not less than mV/m 1,5
    Nominal diameter mm 4±0.2 6±0.3 8±0.3 10±0.3 12±0.4 20±0.4
    Length mm 200-3,000±5

    * the values are given for information only and are defined as per consumer’s requirements

     

    Physical and mechanical properties of fiberglass rods

    Property Unit SPО-0 SPО 5х10 SPО 5х50 SPО 15х15х5
    Density kg/m³ 1900-2200 - 1900-2150 -
    Tensile stress at break across fibres, not less than MPa (kg/cm²) - - 900 (9000) -
    Water absorption at a temperature of (23±2)°С over the period of (24±1) hrs, not more than % - - 0.2 -
    Impact viscosity across fibres, not less than kJ/m² - - 350 -
    Surface resistivity, not less than Ohm - - 1.1013 -
    Resistance to short-duration heating for 5 hrs, not less than °С - - 250 -
    Dielectric strength along fibresat 50Hz, not less than kVeff/mm - 1.0 - 1.0
    Length mm

    1,580±2

    1,595±2

    1,390±2

    1,395±2

    198+2

    205+2

    355+2

    397+2

    198+2
    Height mm - 5 5 15
    Width mm - 10 50 15
    Wall thickness mm

    4.0

    (+1/-0.5)

    - - 5
    Weight of a linear meter kg 0.54±0.10 0.095±0.005 0.475±0.1 0.238±0.05

     

    Manufacture of the material with other physical and mechanical properties is accepted upon agreeing about with a consumer.

  • Typical application:

    for manufacture of details for transport machine building, fishing rods, walking sticks for handicapped persons, ladders, A-shaped ladders, insulating rods, luggage racks, curtain holders as well as reinforcing materials in various structures.

    • Profiles are intended for electrical machines as coil braces, for fixing transformer and choke coils and for other industrial applications.
    • Rods are used for manufacturing electroinsulation-purpose details, lengthening variable-resistance axes and other purposes in transport engineering household articles:
      • SSО-4 – for lengthening variable-resistance axes and other purposes
      • SSО-6, SSО-8, SSО-10 – for curtain holders and other purposes in transport engineering and household articles
      • SSО-10-А, SSО-12-А, SSО-15-А, SSО-22-А – for manufacturing electroinsulating-purpose articles and for other purposes
      • SSО-6, SSО-8, SSО-10, SSО-12, SSО-15, SSО-16, SSО-20, SSО-22, SSО-26, SSО-36 – for household usage: for fastening garden plants, manufacturing fences, securing bars when building wooden houses, for fixing suspended shelves for and other purposes.
  • Profiles, rods, pipes are:

    • non-toxic,
    • explosion-proof,
    • no harmful environmental impact under operating conditions,
    • operating temperature ranges from -60ºС to +155ºС.